Taiwan TV Wall Mount Cost: VESA Pattern, Wall Type, Height

TV wall mount installation cost has no single answer: it is made up of four parts, the bracket, labor, wall reinforcement and cable hiding, and then goes up or down with TV size and wall material. Taking public pages checked on 2026-11-07 as examples, the "fixed wall mount installation service" (固定式壁掛施工及安裝) for 60-69 inches on a PChome 24h store page is listed at NT$3,100, and momo's limited-time discounted price for the same size is NT$3,024; the PRO360 platform price page (showing a last update of 2023/11/01, and saying it draws on quotes from 2024 to 2026) says TV wall bracket installation costs about NT$1,000 to NT$5,000 per set, with a surcharge for over 75 inches or special walls. These are quotes for "bracket plus installation", not fixed prices that apply to any wall, so this article sets out item by item how to split the quote, how to read the VESA hole pattern, how to judge the wall type, and when to stop.

How to split the cost: four items

A quote is usually hard to read because four things are mixed together. Think of them separately first:

1. The wall bracket itself: fixed, tilting and extendable (arm-type) brackets are priced differently, and you need to check whether it supports your TV's VESA hole pattern and weight.
2. Labor: graded by TV size, with retail price lists separating different inch ranges; the LG UK support page mentions that two or more people may be needed to hang the TV safely.
3. Wall reinforcement or special drilling: marble, cultured stone (文化石), quartz tile, wooden lightweight partitions (輕隔間) and so on often carry extra fees or need reinforcement.
4. Cable hiding: exposed cable channels, routing through the wall, or pre-embedded conduits; ask whether the quote includes cable hiding.

Whoever quotes, you should ask clearly "does it include the bracket, does it include the cable channel, which walls cannot be installed on, and is a wasted-trip fee (空趟費) charged if no installation is done after the on-site assessment".

Retailer prices in November 2026 and the PRO360 price page (last updated 2023/11/01)

The table below only sets out public pages checked on 2026-11-07. Prices change with promotions, so follow the page on the day you place the order; this is not a recommendation and not a market price range.

Two points can be seen from the table. First, for the same size range, the listed prices of different sales channels on different dates can differ a lot, and the one momo page lists three prices at once, so any number in this article can only be a "sample at the time of checking prices". Second, these product names say "fixed"; if what you want is a tilting or extendable wall bracket, the prices in the table cannot be applied directly, and the PRO360 page also lists the three types at separate prices.

Extra fees for special wall treatment

The PRO360 price page also lists wall drilling fees (labor and materials included): marble and cultured stone NT$800 to NT$1,000; granite and quartz tile NT$1,000 to NT$1,600. The page also says that if the installer judges after the on-site assessment that installation is not suitable, a wasted-trip fee of NT$500 to NT$1,000 is charged; wooden lightweight partitions usually need to be reinforced with 角料 (wooden sections), at a cost depending on the site; and glass walls are not suitable for installation. These are statements on that platform's page, different installers charge differently, and they can only serve as a list of "which items to ask about when asking for a price".

How to read the VESA hole pattern

General explanation: the back of a TV has four (or more) screw holes, the wall bracket locks onto the TV through them, and the industry standard for the hole pattern is called VESA. The VESA official FAQ says that the Flat Display Mounting Interface (FDMI) standard contains the information you need and can be downloaded free of charge from the VESA public website. The hole pattern is generally written as "horizontal × vertical" (millimeters), and the examples in the table below all come from manufacturer pages:

In practice there are three things to do:

1. Measure the horizontal and vertical distance between the screw holes on the back of your TV, or check the manufacturer's spec page, to get the two numbers "A × B".
2. Confirm that the wall bracket supports this hole pattern, and that its marked load capacity is greater than the TV's weight (including the weight of extended accessories such as audio).
3. Use the screw length and hole diameter that come with the bracket, and do not swap them yourself. For screw specifications and length, follow the manuals of your TV and bracket.

Note also that matching the VESA hole pattern does not mean "definitely compatible": the number of holes, hole depth and the shape of the TV's back panel may differ between brands, which is why manufacturer bracket pages list compatible models by model number. When buying a third-party bracket, first read the range of applicability listed in the bracket's manual.

Wall types: identify first, then choose the fixing method

The wall decides whether you can hang it and what screws to use, and this is the step where TV wall mounting most often goes wrong. The wall-mounting safety notes on the LG UK website say: do not install on wall materials that cannot safely bear the weight of the TV and bracket (such as some tiles, marble, or hollow or weaker surfaces); first identify the wall type (such as concrete, solid masonry, stud wall, tile-faced wall); use screws and wall anchors (anchor bolts) suited to that wall type; before drilling, confirm there are no wires or water pipes behind the wall; and "if you are not sure whether the wall can support the TV, stop and contact a professional installer". LG's page also says that two or more people may be needed to lift the TV and hang it safely.

The "when to stop" column in the table is a work safety judgment, not a regulation. A lightweight partition is not always impossible to hang on; it depends on what the bracket and TV manuals say, and whether it can be fixed to the structural studs inside the wall. The site has an article specifically on identifying walls and fixing methods, see wall-hung TV cabinet and wall anchor safety guide, which is not repeated here. The PRO360 price page also mentions that wooden lightweight partitions usually need to be reinforced with 角料 (wooden sections) and that glass walls are not suitable for installation; the page also says "for concrete walls, brick walls and wooden-board walls, the wall thickness must be at least 2 cm or more (if the TV size is 50 inches or more, the wall thickness must be 5 cm or more) before TV wall-mount installation work can be done".

How high to hang it: eye level and size

There is no single official figure for TV height. The usual approach is to take "eye level at the center of the screen when seated" as the standard: sit where you normally watch TV, have someone measure your eye height, and then line the center of the screen up with that height. To find out what size suits what distance, and the difference between OLED and miniLED, see TV size and viewing distance buying guide. If the bracket can tilt, you can hang it slightly higher and tilt it down; the PRO360 price page says that for a fixed wall bracket "after installation only the front-back tilt angle of the TV can be adjusted, and the TV position cannot be adjusted", so the position must be decided before it goes on the wall.

Cable hiding and outlets: plan first, then drill

There are three ways to hide cables: an exposed cable channel stuck on the wall, running the cables inside the wall (which requires making an opening in the wall and running conduit), or pre-embedding conduit in the wall beforehand. The cost varies a lot; the pages cited in this article contain no cable-hiding prices, so this article gives no amount, and when asking for a price it is advisable to say together whether you want cables hidden and where the power and HDMI cables are.

If there is no outlet near the TV position, adding one involves the electrical circuit, so have a qualified person for plumbing and electrical work (水電) handle it, and do not run an extension cord through the wall yourself. For handling a shortage of outlets in an old house, see how to handle insufficient outlets in old houses in Taipei and New Taipei.

Installing it yourself: what to watch for, and when to stop

Installing it yourself is not technically impossible, but the risks are the TV falling and wall damage, and the TV itself has weight. Below is a checklist:

• Whether there are at least two people who can safely lift the TV onto the bracket.
• Whether the wall material has been confirmed, and screws and anchors suited to that wall are used.
• Whether the bracket's load capacity is greater than the TV's weight and the VESA hole pattern matches.
• Whether there are wires or water pipes behind the drilling position.
• Whether you have a spirit level to make sure the mounting plate is level.

In the following situations it is advisable to stop and have an installer come to assess on site: you are not sure what material the wall is, it sounds hollow when tapped, the TV is very large or heavy, the wall is tile or stone, you need to run cables through the wall or add an outlet, or you find the hole crumbling on the very first drill. The LG UK support page also says that if you are not sure whether the wall can bear it, you should stop and contact a professional installer.

How to set a budget

You can estimate a budget range with the formula below, and fill in the price you actually got for each item instead of applying a single "market price":

1. Bracket price (by type and load capacity) +
2. Installation labor (by TV size; ask clearly whether it includes the bracket) +
3. Special wall treatment (tile, stone, lightweight partition reinforcement) +
4. Cable hiding (channel or conduit) +
5. A possible wasted-trip fee (if installation cannot be done after the on-site assessment).

You can use the on-site repair quotation generator to fill in each item and compare it with the quote the installer gave, to confirm nothing is left out.

Frequently asked questions

How much does it roughly cost to install a 65-inch TV on the wall?

The samples found for this article: the PChome 24h store page lists fixed wall mount installation service for 60-69 inches at NT$3,100, and momo's limited-time discounted price for the same size is NT$3,024 (market price NT$5,000). These are page prices of 2026-11-07, for a fixed bracket, and do not include cable hiding or special wall treatment.

Can a TV be hung on a lightweight partition?

You cannot generalize. It depends on whether the TV and bracket manuals state the applicable conditions, and you need to confirm you can fasten into the structural studs inside the wall. The PRO360 price page points out that wooden lightweight partitions usually need to be reinforced with 角料 (wooden sections); the LG UK support page also warns against installing on hollow or weaker surfaces that cannot safely bear the weight. If you are not sure, have an installer come to assess on site.

Who should install it?

It can be a retailer's wall-mount installation service (as listed on the PChome and momo store pages) or an installer on a platform. Whoever you choose, ask clearly whether the bracket is included, which walls cannot be installed on, and how special wall treatment and wasted-trip fees are charged.

Can I buy only the bracket and install it myself?

You can, but first confirm the wall, the VESA hole pattern and the load capacity, and have two people do the work. The Samsung Taiwan accessory page marks the WMN-B16FB/ZW with a safe load of 40 kg, and its delivery section says "Standard installation charges may apply"; whether the installation fee is charged separately follows the explanation at the time you place the order.

Sources

• PChome 24h shopping store page (checked 2026-11-07, in Chinese): listed prices of fixed wall mount installation service by size.
• momo shopping site: installation of a fixed wall bracket for a 60-69 inch LCD TV (checked 2026-11-07, in Chinese): discounted price, promotional price, market price and delivery range.
• PRO360: TV wall mount installation cost (checked 2026-11-07, in Chinese): price ranges, wall drilling fees, wasted-trip fee and notes on lightweight partitions.
• LG UK website: How to install an LG TV wall mount safely (checked 2026-11-07): wall identification, anchors, two-person lifting, professional installation advice.
• Samsung Taiwan: WMN-B16FB/ZW extendable zero-gap wall mount (checked 2026-11-07, in Chinese): VESA 400 X 300 and 400 X 400, safe load 40 kg.
• Samsung Taiwan: UA32N4000 LED TV product specifications (checked 2026-11-07, in Chinese): VESA 100 X 100.
• LG Taiwan: LSW440B original wall mount (checked 2026-11-07, in Chinese): VESA 400 x 400.
• VESA FAQ (checked 2026-11-07): the FDMI standard can be downloaded free of charge from the VESA public website.